Sharp MS702 Operation Manual - Page 15

6

When a sound, such as a person

speaking,

is

picked

up

by

the

microphone, recording will begin auto-

matically.

●

If a silence lasts for 3 seconds or more,

the recording will be paused automat-

ically. However, the unit will not pause

for about the first 10 seconds after

recording has started.

To interrupt a synchro recording:

Press the

button while recording.

●

The Mic synchro recording mode will

be canceled, and the unit will enter the

recording stand-by mode.

●

To resume synchro recording, press

the ENTER/F.PLAY/SYNCHRO button

again.

To stop recording:

Press the

■

/:OFF button.

■

Recording from the microphone

(Mic manual recording)

●

You can start recording manually (any

time you like).

1

Put the unit in the recording stand-by

mode. (Perform steps 1 - 4 in the “Mic

synchro recording” section.)

2

Press the

button.

●

Recording will start.

To interrupt a recording:

Press the

button while recording.

●

The unit will enter the recording stand-

by mode.

●

To resume recording, press the

button again.

The track number will be increased by

one each time you interrupt a record-

ing.

To stop recording:

Press the

■

/:OFF button.

Notes:

●

If you want to use a microphone, be sure it is a plug-in power type microphone that

can be powered by the main unit.

●

Insert the plug firmly. Otherwise, the recording will not be made properly.

●

Use a microphone with a 1/8" (3.5 mm) diameter stereo mini plug.

●

When a recording is made using a stereo microphone (optionally available), an analog

recording will be made.

●

While making a mic recording, do not connect anything to the LINE IN jack on the

main unit.

14

MD-MS702

Sharp MS702 Operation Manual - Page 15

To interrupt a synchro recording, To stop recording, Recording from the microphone, Mic manual - md manual

Page 15 highlights