Sharp PG-C45XL PG-C45X Operation Manual - Page 25
Connecting to, Component Video, Equipment, Connect the projector to
View all Sharp PG-C45XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connections and Setup Connecting to Component Video Equipment Use a 3 RCA to 15-pin D-sub cable when connecting to the INPUT 1 or 2 terminal, component video equipment such as DVD players and DTV* decoders. *DTV is the umbrella term used to describe the new digital television system in the United States. 1 Connect the projector to the video equipment using the 3 RCA to 15-pin D-sub cable. 2 Connect the projector to the video equipment using a ø3.5 mm stereo minijack to RCA audio cable (commercially available). Note • When connecting the projector to the video equipment in this way, select "Component" for "Signal Type" in the "Picture" menu. See page 46. • A ø3.5 mm stereo minijack to RCA audio cable (commercially available) is required for audio input. Optional cable 3RCA to 15-pin D-sub cable Type: AN-C3CP (9'10" (3.0 m)) To analog component output terminal To audio output terminal DVD player or DTV* decoder 1 3 RCA to 15-pin D-sub cable (sold separately) 2 ø3.5 mm stereo minijack to RCA audio cable (commercially available) -21