Sharp PG-C45XL PG-C45X Operation Manual - Page 88
If you want to clean the air vents during projector operation, be sure to first press
View all Sharp PG-C45XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Maintenance Indicators Info • If the temperature warning indicator illuminates, and the power turns off, follow the above possible solutions and then wait until the projector has cooled down completely before plugging in the power cord and turning the power back on. (At least 5 minutes.) • If the power is turned off and then turned on again, as during a brief test, the lamp replacement indicator may be triggered, preventing the power from going on. Should this occur, take the power cord out of the wall outlet and plug it back in again. • If you want to clean the air vents during projector operation, be sure to first press and after the power has turned off and the cooling fan has stopped, then clean the vents. • Do not unplug the power cord after the power has been turned off and while the cooling fan is running. The cooling fan runs for about 90 seconds. -84