Sharp PN-L401C PN-L401C Quick Start Setup Guide - Page 11
Mounting Precautions For SHARP dealers and service engineers
View all Sharp PN-L401C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation. This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure. • To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the thickness of the mounting bracket. 5/16 - 3/8 inch (8-10 mm) Screws (M6) Mounting bracket Monitor mounting • Do not use an impact driver. • After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount. • Do not use any screw holes other than VESA holes for installation. • When moving the monitor, be sure to hold it around the periphery. Do not grasp the screen or tray. This may cause product damage, failure, or injury. • If you need to temporarily place the monitor on a table or other surface during installation, spread a thick soft cloth on the table to prevent damage to the screen and table. • Prior to repacking or removal, remove the tray and speaker covers. nAttaching the Tray Secure the tray using 2 tray mounting screws (M3) (supplied). Landscape orientation Portrait orientation Insert tab into hole to secure Insert tab into hole to secure 9E