Sharp PN-L802B PN-L802B Professional LCD Monitor Operation Manual - Page 42

Controlling the Monitor with a PC (RS-232C) Others Function SCREEN SIZE (PC) SCREEN SIZE (AV) VOLUME MUTE INFORMATION MODEL SERIAL NO BRIGHT TEMPERATURE SENSOR Command Direction WIDE WR WIDE WR VOLM WR MUTE WR INF1 R SRNO R VLMP WR DSTA R Parameter 1-5 1-5 0-31 0-1 0-31 Temperature acquisition ERRT R CAUSE OF LAST STANDBY MODE STCA W 0 R Reply Control/Response contents 1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2 1-5 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot 0-31 0-1 0: OFF, 1: ON Value Value 0-31 0 Internal temperature normal 1 Internal temperature abnormal has occurred and the monitor is in standby mode 2 Internal temperature abnormal occurred (To delete the information of temperature abnormal, turn off the main power.) 3 Internal temperature abnormal has occurred and backlight brightness is dimmed 4 Temperature sensor abnormal Value Temperature at temperature sensors 1 through 3 are returned in the following forms: [Sensor 1], [Sensor 2], [Sensor 3] Indicates a temperature sensor abnormality when "126" is returned. Initialization 0 No detectable error has occurred 1 Standby mode by POWER button 2 Main power off by the main power switch 3 Standby mode by RS-232C or LAN 4 Input signal waiting mode by No Signal 6 Standby mode by abnormal temperature 8 Standby mode by SCHEDULE setting 20 Standby mode by OFF IF NO OPERATION setting *2 *1 (A) (B) ○ ○ ○ - ● ○ ● ○○ ○ ● Commands for setting of the GAMMA user data Function RED GAMMA DATA TRANSFER GREEN GAMMA DATA TRANSFER BLUE GAMMA DATA TRANSFER RED GAMMA DATA READ GREEN GAMMA DATA READ BLUE GAMMA DATA READ USER DATA INITIALIZE USER DATA SAVE Command Direction Parameter Reply UGRW W UGGW W UGBW W UGRR W UGGR W UGBR W UGRS W UGSV W aaxxxx ··· xxxxcc (xxxx: 32 pieces) aa: 01-16 xxxx: 0000-1023 cc: 00-FF 1-16 1-16 1-16 xxxx ··· xxxx (xxxx: 32 pieces) xxxx: 0000-1023 0 0 Control/Response contents aa: Block number xxxx: 32 pieces of user data cc: Checksum (ASCII data) of the block number and user data xxxx: User data of 32 pieces Initialize the user data. Save the user data in the monitor. *2 *1 (A) (B) ○○○ E 42