Sharp PN-L802B PN-L802B Professional LCD Monitor Operation Manual - Page 53

Specifications nProduct Specifications Model PN-L802B LCD component 80" Class [80 inch (203.2cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.923 mm (H) × 0.923 mm (V) Viewing angle 160° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 69-3/4 x 39-1/4 (1771.2 x 996.3) Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω] Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals PC/AV Digital HDMI x 1 PC Analog Mini D-sub 15 pin, 3 rows x 1 Audio 3.5 mm mini stereo jack x 1 Serial (RS-232C) D-sub 9 pin x 1 When PN-ZB01 PC/AV (optional) is PC attached AV Digital DVI-D 24 pin (HDCP compatible) x 1 Analog BNC *1*2 x 1 Composite video BNC x 1 S-video x 1 Component BNC (Y, Cb/Pb, Cr/Pr) *1 x 1 Audio RCA pin (L/R) x 2 Output terminals Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 When PN-ZB01 PC/AV Digital (optional) is External speaker attached DVI-D 24 pin x 1 7 W + 7 W [6 Ω] LAN terminal [When PN-ZB01 (optional) is attached] 10 BASE-T/100 BASE-TX Speaker output 7 W + 7 W Touch Panel Detection method Infrared camera method Detection area inch (mm) 69-3/4 x 39-1/4 (1771.2 x 996.3) PC connector USB (1.1 compliant) Power supply Supplied from USB Touch pen Ultrasonic communication method Power requirement AC 100 V - 240 V, 2.9 A, 50/60 Hz Operating temperature *3*4 41°F to 95°F (5°C to 35°C) Operating humidity*4 20% to 80% (no condensation) Power consumption 255 W / 1.0 W / 1.0 W (Maximum / input signal waiting mode *5 / standby mode *6) Power consumption [When PN-ZB01 (optional) is attached] 260 W Dimensions (excluding protrusions) inch (mm) Approx. 74 (W) x 5-5/16 (D) x 45-9/16 (H) (1880 x 135 x 1157) Weight lbs. (kg) Approx. 224.9 (102) (excluding the temporary stand) Weight [PN-ZB01 (optional)] lbs. (kg) Approx. 1.102 (0.5) *1 Cannot be used simultaneously. *2 Does not support plug and play. *3 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. *4 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied. *5 When AUTO INPUT CHANGE is set to OFF. *6 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 53 E