Sharp PN-S525 PNS525 Operation Manual - Page 18

Specifications nProduct Specifications Model LCD element Max. resolution (pixels) Max. colors Pixel pitch Viewing angle Screen active area inch (mm) Computer input signal Sync signal Video color system Plug and play Power management Input terminals Output terminals LAN terminal Power requirement Operating temperature Operating humidity Power consumption Dimensions inch (mm) Weight lbs. (kg) PN-S525 52" wide (132.2 cm diagonal) ASV low-reflection black TFT LCD 1920 x 1080 16.77 M colors (8 bits/color) 0.600 mm (H) x 0.600 mm (V) 176° right/left/up/down (contrast ratio ≥ 10) 45-3/8 x 25-1/2 (1152.0 x 648.0) Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω] Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz) VESA DDC2B VESA DPMS, DVI DMPM PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1 HDMI x 1 PC Analog Mini D-sub 15 pin, 3 rows x 1 BNC *1*2 x 1 Audio 3.5 mm mini stereo jack x 1 AV Composite video BNC x 1 S-video x 1 Component BNC (Y, Cb/Pb, Cr/Pr)*1 x 1 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 PC/AV Digital DVI-D 24 pin x 1 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 Speaker 7 W + 7 W [6 Ω] 10 BASE-T/100 BASE-TX AC 100 V - 240 V, 50/60 Hz 32°F to 104°F (0°C to 40°C) 20% to 80% (no condensation) 275 W (Input signal waiting mode: 12 W *3, Standby mode: 2.0 W *4) Approx. 49-3/8 x 5-7/8 x 29-3/16 (1,254 x 149 x 742) (excluding protrusions) Approx. 86.0 (39) (excluding the temporary stand) *1 Cannot be used simultaneously. *2 Does not support plug and play. *3 When AUTO INPUT CHANGE is set to OFF. *4 When STANDBY MODE is set to LOW POWER, LAN and SCHEDULE are not used. When STANDBY MODE is set to STANDARD, 12W. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. nPower management This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in order for the monitor's power management function to work. DPMS: Display Power Management Signaling DPMS ON STATE STANDBY SUSPEND OFF STATE Screen Power consumption Hsync Display 275 W Yes No No display 12 W* Yes No Vsync Yes Yes No No DMPM: Digital Monitor Power Management DMPM Monitor ON Active OFF Screen Power consumption Display 275 W No display 12 W* * When AUTO INPUT CHANGE is set to OFF. E 16