Sharp R-CD2200M R-CD1200M , R-CD1800 , R-CD-2200M Operation Manual - Page 18

NOTES: 1. Only Dual Digit Input method can be used when inputting memory numbers in Multiplication Factor for Double/Triple Quantity. 2. The multiplication factors can be set from 0.01 to 9.99 for double quantity and triple quantity. 3. When you want to know the multiplication factor for triple quantity, press the DOUBLE/TRIPLE QUANTITY twice at step 1 after pressing the CUSTOM HELP pad twice. 4. Multiplication Factors for Double/Triple Quantity can be checked or changed before pressing the STOP/ CLEAR pad to exit for Custom Help Function. 11. Express Defrost Setting Express Defrosting uses 3 stages to defrost foods quickly. The defrosting sequence is preset as follows, but you can change the setting. Defrosting Time STAGE T x A1: (0.20*) + B1: (20*) 1 sec. STAGE T x A2: (0.13*) + B2: (30*) 2 sec. STAGE T - STAGE1 - STAGE2 3 Pause See the table for The Pause Timing Timing below (50*) Power Level PL1 (40*) % PL2 (30*) % PL3 (20*) % T : INPUT TIME (TOTAL COOKING TIME) * : The numbers in the parentheses are factory settings and can be adjusted. Express Defrost is preset to pause during the sequence when 50% of total defrosting time has passed to check food. Pause timings can also be adjusted. Pause Timing KEY Display Pause Timing 0 0 No pause. 1 1 After 10% of total cooking time. 2 2 After 20% of total cooking time. 3 3 After 30% of total cooking time. 4 4 After 40% of total cooking time. 5 5 After 50% of total cooking time. 6 6 After 60% of total cooking time. 7 7 After 70% of total cooking time. 8 8 After 80% of total cooking time. 9 9 After 90% of total cooking time. START A After ending of each stage * Suppose you want to change the Express Defrost set factory settings to the following: Defrosting Time Power Level STAGE 1 T x 0.30 + 10 sec. 50% STAGE 2 T x 0.15 + 20 sec. 20% STAGE 3 T - STAGE1 - STAGE2 10% Pause When 70% of total defrosting time has Timing passed. Procedure Display CUSTOM EXPRESS x 2 HELP DEFROST 1 Press the CUSTOM (STAGE 1) HELP pad twice within 2 seconds DEF. CHECK and press the EXPRESS DEFROST (A1) pad. (The Express DEF. CHECK Defrost setting (B1) of each phase is shown for 1.5 seconds per 0.3 seconds until the DEF. CHECK (Power Level 1) SELECT/TIME pad is pressed.) DEF. CHECK (STAGE 2) (B2) DEF. CHECK (Power Level 2) DEF. CHECK (STAGE 3) DEF. CHECK (Pause Timing) DEF. CHECK (Power Level 3) DEF. (A2) CHECK DEF. CHECK DEF. CHECK 2 Press the SELECT TIME pad and enter desired SELECT multiplication for A1 at TIME DEF. Stage 1. (Ex: Enter 3,0 for 0.30.) 3 DEF. 0 DEF. 3 Press the SELECT TIME pad and enter desired time for B1 at Stage 1. SELECT TIME DEF. (Ex: Enter 1 for 10 seconds.) 1 DEF. 4 Press the SELECT POWER pad and enter SELECT desired power level for POWER DEF. PL1 at Stage 1. (Ex: Enter 5 for 50%) 5 DEF. EN-17