Sharp R-CD2200M R-CD1200M , R-CD1800 , R-CD-2200M Operation Manual - Page 19

Procedure Display 5 Press the SELECT TIME pad and enter desired SELECT multiplication for A2 at TIME DEF. Stage 2. (Ex: Enter 1, 5 for 0.15.) 1 DEF. 5 DEF. 6 Press the SELECT TIME pad and enter desired SELECT time for B2 at Stage 2. TIME DEF. (Ex: Press 2 for 20 seconds.) 2 DEF. 7 Press the SELECT POWER pad and enter SELECT desired power level for POWER DEF. PL2 at Stage 2. (Ex: Enter 2 for 20%) 2 DEF. 8 Press the SELECT TIME pad and enter the pause SELECT timing. TIME DEF. (Ex: Enter 7 for when 70% of total defrosting time 7 has passed.) DEF. 9 Press the SELECT POWER pad and enter SELECT desired power level for POWER DEF. PL3 at Stage 3. (Ex: Enter 1 for 10%) 1 DEF. START 10 Press the START pad. STOP CLEAR 11 Press the STOP/CLEAR pad to exit from the Custom Help Function. NOTES: 1. See the table for Microwave Power Level on page EN-10 and The Pause Timing on page EN-17. 2. You can enter minus numbers for B1 and B2 at steps 3 and 6. In that case, press the SELECT TIME pad twice at step 3 or 6 ( is displayed.) and enter desired time for or B1 and B2 at Stage 1 and 2. Press the SELECT TIME pad again to enter positive numbers. ( is displayed.) Saving Memories * Memory 0 - 9 are programmed as factory settings. See the table of Programmed Memories on page EN-8. * Memories must be programmed before memory cooking can be used. Memory banks Dual Digit: Memory 0-99 Single Digit: Memory 0-9 Repeat Digit Input: Memory 0-29 Max. cooking stages: 4 stages Setting time and power level for Single Stage * Suppose you want to set 1 minute at 70% with memory 2. Procedure Display X 2 SET MEMORY NO. 1 Press the SET MEMORY pad twice within 2 seconds. 2 2 Enter memory number. NO. SELECT TIME 3 Press the SELECT TIME pad. 1 0 0 4 Enter cooking time. SELECT POWER 5 Press the SELECT POWER pad. 7 6 Enter power level. SET MEMORY NO. 7 Press the SET MEMORY pad to save memory. STOP CLEAR 8 Press the STOP/CLEAR pad to exit. EN-18