Singer One Instruction Manual 19 - Page 40
Turning, Square, Corners, Outside, Corner, Inside
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
• Fold the fabric with the wrong sides together and sew. • Press the pin tucks in the same direction. Turning Square Corners (1) Outside Corner • Cut out approximately 2 cm (51/64 inch) from the corner, in line with the overedge seam edge. • Sew one stitch beyond point (A) and stop. • Raise needle and presser foot. • Pull the fabric to the rear of the machine just enough to release the thread caught on the finger of the throat plate. Note: Presser foot has been removed to show detail. • Turn the fabric and lower the presser foot so that the knife is positioned in line with the cut edge. • Pull slack threads up, then start to sew. (2) Inside Corner • Cut fabric at seam edge. Cutting line- -I 1 - 2 cm .2) Cutting line Cut Slit 39
•
Fold
the
fabric
with
the
wrong
sides
together
and
sew.
•
Press
the
pin
tucks
in
the
same
direction.
Turning
Square
Corners
(1)
Outside
Corner
•
Cut
out
approximately
2
cm
(51/64
inch)
from
the
corner,
in
line
with
the
overedge
seam
edge.
•
Sew
one
stitch
beyond
point
(A)
and
stop.
•
Raise
needle
and
presser
foot.
•
Pull
the
fabric
to
the
rear
of
the
machine
just
enough
to
release
the
thread
caught
on
the
finger
of
the
throat
plate.
Note:
Presser
foot
has
been
removed
to
show
detail.
•
Turn
the
fabric
and
lower
the
presser
foot
so
that
the
knife
is
positioned
in
line
with
the
cut
edge.
•
Pull
slack
threads
up,
then
start
to
sew.
(2)
Inside
Corner
•
Cut
fabric
at
seam
edge.
Cutting
line
-
-I
.2)
1
-
2
cm
Cutting
line
Cut
Slit
39