Singer One Instruction Manual 19 - Page 5
Contents
View all Singer One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
CONTENTS Page 1. Selection of Stitches 5 2. Handy Reference Chart 6 3. Accessories 7 4. Needle Information 7 5. Principal Parts 8 6. How to Open Looper Cover 9 7. Principal Parts Behind Looper Cover 9 8. Preparation Prior to Sewing 9 9. Preparation for Threading 10 •Setting up the thread guide holder 10 10. How to Remove and Insert Needles 11 •To remove needle(s) 11 •To insert needle(s) 11 11. Threading the Machine 12 •Threading diagram 12 •Understanding the color code 12 •To thread the machine correctly 12 1) Threading the upper looper (Orange) 12 2) Threading the lower looper (Yellow) 14 3) Threading the right needle (Green) 16 4) Threading the left needle (Blue) 18 • Important threading information 19 12. How to Change Threads / Tie on Method 20 13. How to Adjust the Stitch Length 21 14. How to Adjust the Seam Width 21 •Width adjustment by changing needle position 21 •Width adjustment with adjustment knob 21 15. How to Adjust the Presser Foot Pressure 22 16. Differential Feed 23 •Gathered overedge 23 •Stretch overedge 23 17. How to Disengage Movable Upper Knife 25 18. Free Arm Sewing (Tubular Work) 26 19. Standard Overedge and Rolled Hem Stitching 27 •To sew standard overedge 27 •To sew rolled hem 27 20. Chaining Off and Test Sewing 28 Page 21. Suggested Tension Setting 29 1) 3-Thread Overlock 29 2) 3-Thread Flatlock 30 3) 3-Thread Wrapped Edge Overlock 31 4) 4-Thread Ultra Stretch Mock Safety Stitch 32 22. How to Sew a Rolled Hem 33 1) 3-thread standard rolled hem stitching 34 2) 3-thread upper looper thread wrapped rolled hem stitching 34 23. Stitch Variations and Sewing Techniques 36 •How to sew a flatlock decorative seam 36 • How to sew an overlock blind hem 38 •How to sew pin tucks 38 •Turning square corners 39 •Pin placement 40 •Securing the thread chain 40 • How to reinforce a seam 41 •Braiding by chaining off 41 24. Machine Maintenance 42 •Cleaning the machine 42 •Oiling the machine 42 • How to replace the stationary knife 43 •How to exchange light bulb 44 25. Troubleshooting Chart 45 26. Relationship between Cloth, Thread and Needle.... 46 27. Specification 47 4