Sony BDP S550 Operating Instructions - Page 49
Audio HDMI, BD Audio Setting, Audio ATT, Dolby Digital, 48kHz/96kHz PCM, from the DIGITAL OUT COAXIAL
UPC - 027242737518
View all Sony BDP S550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Settings and Adjustments Audio (HDMI) Selects the signal type for the HDMI OUT jack. Auto 2ch PCM Normally select this. Outputs audio signals according to the status of the connected HDMI device. Downmixes to 2-channel Linear PCM signals before outputting from the HDMI OUT jack. b Select "2ch PCM" when connecting a TV or an AV amplifier (receiver) that does not support Dolby Digital or DTS, otherwise noise or no sound may result. BD Audio Setting Selects whether to mix or not mix interactive audio and secondary audio (commentary) when playing a BD that contains such audio. Mix Direct Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. Outputs the primary audio only. b PCM 96 kHz and PCM 192 kHz audio signals are output as PCM 48 kHz audio signals when "BD Audio Setting" is set to "Mix." Audio ATT Lowers the audio output level to prevent sound distortion. On Enables Audio Attenuation. Off Disables Audio Attenuation. b "Audio ATT" does not affect the output from the HDMI OUT jack and the DIGITAL OUT (OPTICAL/COAXIAL) jack. Dolby Digital Selects the audio signals output when playing Dolby Digital discs. This setting affects the output from the DIGITAL OUT (COAXIAL/OPTICAL) jack. Downmix PCM Dolby Digital Converts to output Linear PCM signals. Select this when connecting an audio device without a built-in Dolby Digital decoder. Select this when connecting an audio device with a builtin Dolby Digital decoder. DTS Selects the audio signals output when playing DTS discs. This setting affects the output from the DIGITAL OUT (COAXIAL/ OPTICAL) jack. Downmix PCM DTS Converts to output Linear PCM signals. Select this when connecting to an audio device without a built-in DTS decoder. Select this when connecting to an audio device with a built-in DTS decoder. 48kHz/96kHz PCM Selects the maximum sampling frequency for the PCM signals output from the DIGITAL OUT (OPTICAL/COAXIAL) jack. 48kHz/16bit 96kHz/24bit Outputs audio signals of 96 kHz sampling as 48 kHz/ 16 bit. Outputs audio signals of 96 kHz sampling as 96 kHz/ 24 bit. However, the signals will be output as 48 kHz/ 16 bit if the source is copyprotected. ,continued 49