Sony BDP-S560 Operating Instructions - Page 31

9 Select "Start," and press ENTER. 10 Press and hold the WPS button on the wireless LAN router (access point) until the light on the wireless LAN router (access point) starts to blink. Press the WPS button within 2 minutes after step 9. The message "Access point registration is complete." appears. Example: when the wireless LAN router (access point) has a WPS button b • When the player does not detect a wireless LAN router (access point), repeat from step 9 after a while. • In some cases, depending on the security of the wireless LAN router (access point), it may not be possible to use the Wi-Fi Protected Setup function. In this case, follow the on-screen instructions, and change the settings of the wireless LAN router (access point). 11 Select "Do not use," and press ENTER. If your Internet service provider has a specific proxy server setting, select "Use." For details, see "Network Settings" on page 55. 12 Select "Perform" using M/m, and press ENTER. The network diagnostic starts. Results are displayed after the player finishes the network diagnostic. If an error message appears, follow the on-screen instructions. For further details, visit the following website and check the FAQ contents: http://www.sony.com/blurayupdate 13 Select "Finish," and press ENTER. 14 Check the settings, and select "Finish," then press ENTER. The message "Settings are complete." appears. If an error message appears in the network diagnostic results, check the message. Then, set the network settings again or perform the network diagnostic again. Setting wireless LAN (Access point scan) Use the following procedure when you connect the player to a wireless LAN router (access point) that is Wi-Fi Protected Setupcompatible without security set or not Wi-Fi Protected Setup-compatible. 1 Follow steps 1 and 2 of "Step 4: Connecting to the Network" on page 24. 2 Check the SSID and the security key on the setting screen of your wireless LAN router (access point). For information about how to use the setting screen of the wireless LAN router (access point), visit the following website or consult the manufacturer of the wireless LAN router (access point): http://www.sony.com/blurayupdate - Security type: For details on the type of security that can be used on this player, see "About Wireless LAN Security" on page 70. - Security key: The wireless LAN router (access point) has a WEP or WPA key according to the selected security type. z WEP or WPA key may be displayed as "passphrase" or "network key" depending on the wireless LAN router (access point). 3 Press HOME. 4 Select (Setup) using