Sony BDP-S560 Operating Instructions - Page 32
Select Auto, and press ENTER., Select Auto Acquisition, and press - specification
UPC - 689466112917
View all Sony BDP-S560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
8 Select "Access point scan," and press ENTER. The player will detect nearby access points and display the SSID (Service Set Identifier) and security settings. 9 Select the access point with the SSID you checked in step 2, and press ENTER. When your wireless LAN router (access point) is not detected, press RETURN and repeat from step 8 after a while. If the router is still not detected, press RETURN to select "Manual registration" in step 8. For details, see "Internet Settings" on page 55. 10 Check the security, and press ENTER. The display for entering WEP or WPA key appears. • If you select "None," go to step 13. z The appropriate security is automatically selected. You do not normally need to change the security. 11 Press ENTER to input the WEP or WPA key. To enter characters, see page 57. b Make sure the WEP or WPA key is correctly entered before you proceed to step 12. Once you press , in step 12, you cannot check the characters on the screen. 12 Press ,. b The WEP or WPA key is displayed as 8 asterisks no matter how many characters you enter. 13 Select "Auto Acquisition," and press ENTER. If you use a static IP address, select "Manual." For details, see "Network Settings" on page 55. 14 Select "Auto," and press ENTER. If you specify a DNS server, select "Manual." For details, see "Network Settings" on page 55. 15 Select "Do not use," and press ENTER. If your Internet service provider has a specific proxy server setting, select "Use." For details, see "Network Settings" on page 55. 16 Select "Perform" using M/m, and press ENTER. The network diagnostic starts. Results are displayed after the player finishes the network diagnostic. If an error message appears, follow the on-screen instructions. For further details, visit the following website and check the FAQ contents: http://www.sony.com/blurayupdate 17 Select "Finish," and press ENTER. 18 Check the settings, and select "Finish," then press ENTER. The message "Settings are complete." appears. If an error message appears in the network diagnostic results, check the message and set the network settings again. 32