Sony BDV-E6100 Operating Instructions 1 - Page 39
Other Operations, Test Tone]
View all Sony BDV-E6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Other Operations 2 Press B/b to select [Setup]. 3 Press V/v to select [Audio Settings], then press . 4 Press V/v to select [Speaker Settings], then press . The [Select speaker layout.] display appears. 5 Press V/v to select setting according to your speakers placement, then press . • [Standard]: The surround speakers are installed in the rear position. • [All Front]: All speakers are installed in the front position. Note The [Distance] and [Level] settings are reset to default settings each time you change the speaker layout setting. 6 Press V/v to select the item, then press . 7 Press V/v to adjust the parameter. 8 Press B/b and to confirm the settings. Check the following settings. x [Distance] Be sure to set the parameters of the distance from the listening position to the speakers. You can set the parameters from 0 to 23 feet (0.0 to 7.0 meters). [Front Left/Right] 10 ft/3.0 m: Set the front speaker distance. [Center] 10 ft/3.0 m: Set the center speaker distance. [Surround Left/Right] 10 ft/3.0 m: Set the surround speaker distance. [Subwoofer] 10 ft/3.0 m: Set the subwoofer distance. Tip You can change the unit of measurement (feet or meters) by pressing the color button (RED). x [Level] You can adjust the sound level of the speakers. You can set the parameters from -6.0 dB to +6.0 dB. Be sure to set [Test Tone] to [On] for easy adjustment. [Front Left/Right] 0.0 dB: Set the front speaker level. [Center] 0.0 dB: Set the center speaker level. [Surround Left/Right] 0.0 dB: Set the surround speaker level. [Subwoofer] 0.0 dB: Set the subwoofer level. x [Test Tone] The speakers will emit a test tone to adjust [Level]. [Off]: The test tone is not emitted from the speakers. [On]: The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [Speaker Settings] items, the test tone is emitted from each speaker in sequence. Adjust the sound level as follows. 1 Set [Test Tone] to [On]. 2 Press V/v to select [Level], then press . 3 Press V/v to select the speaker type you want, then press . 4 Press B/b to select the left or right speaker, then press V/v to adjust the level. 5 Press . 6 Repeat Steps 3 to 5. 39US