Sony BDV-E6100 Operating Instructions 1 - Page 55

Audio Return Channel function., The sound outputs from the center

Get Sony BDV-E6100 PDF manuals and user guides View all Sony BDV-E6100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Additional Information An image is not displayed on the entire TV screen. t Check the setting of [TV Type] in [Screen Settings] (page 44). t The aspect ratio on the disc is fixed. Color irregularity occurs on the TV screen. t If the speakers are used with a CRTbased TV or projector, install the speakers at least 0.3 meters (1 foot) from the TV set. t If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes. t Make sure that no magnetic object (magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers. Sound There is no sound. t The speaker cords are not connected securely. t Check the speaker settings (page 38). There is no sound from the TV via the HDMI (OUT) jack when using the Audio Return Channel function. t Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] (page 48). Also, set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Auto] (page 48). t Make sure that your TV is compatible with the Audio Return Channel function. t Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function. The system does not output sound of TV programs correctly when connected to a set-top box. t Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off] (page 48). t Check the connections (page 18). Severe hum or noise is heard. t Move your audio equipment away from the TV. t Clean the disc. The sound loses stereo effect when you play a CD. t Select stereo sound by pressing AUDIO (page 35). The sound outputs from the center speaker only. t Depending on the disc, the sound may output from the center speaker only. No sound or only a very low-level sound is heard from the surround speakers. t Check the speaker connections and settings (pages 16, 38). t Check the sound mode setting (page 22). t Depending on the source, the effect of the surround speakers may be less noticeable. t A 2-channel source is being played. Distortion occurs in the sound of a connected equipment. t Reduce the input level for the connected equipment by setting [Attenuate - AUDIO] (page 46). A sudden loud music is heard. t The build-in sound demonstration is activated. Press VOL - to reduce the volume or press x to stop the demonstration. 55US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
55
US
Additional Information
An image is not displayed on the
entire TV screen.
t
Check the setting of [TV Type] in
[Screen Settings] (page 44).
t
The aspect ratio on the disc is fixed.
Color irregularity occurs on the TV
screen.
t
If the speakers are used with a CRT-
based TV or projector, install the
speakers at least 0.3 meters (1 foot)
from the TV set.
t
If the color irregularity persists, turn
off the TV set once, then turn it on after
15 to 30 minutes.
t
Make sure that no magnetic object
(magnetic latch on a TV stand, health
care device, toy, etc.) is placed near the
speakers.
There is no sound.
t
The speaker cords are not connected
securely.
t
Check the speaker settings (page 38).
There is no sound from the TV via the
HDMI (OUT) jack when using the
Audio Return Channel function.
t
Set [Control for HDMI] in [HDMI
Settings] of [System Settings] to [On]
(page 48). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 48).
t
Make sure that your TV is compatible
with the Audio Return Channel
function.
t
Make sure that an HDMI cable is
connected to a jack on your TV that is
compatible with the Audio Return
Channel function.
The system does not output sound of
TV programs correctly when
connected to a set-top box.
t
Set [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page 48).
t
Check the connections (page 18).
Severe hum or noise is heard.
t
Move your audio equipment away
from the TV.
t
Clean the disc.
The sound loses stereo effect when
you play a CD.
t
Select stereo sound by pressing
AUDIO (page 35).
The sound outputs from the center
speaker only.
t
Depending on the disc, the sound may
output from the center speaker only.
No sound or only a very low-level
sound is heard from the surround
speakers.
t
Check the speaker connections and
settings (pages 16, 38).
t
Check the sound mode setting
(page 22).
t
Depending on the source, the effect of
the surround speakers may be less
noticeable.
t
A 2-channel source is being played.
Distortion occurs in the sound of a
connected equipment.
t
Reduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page 46).
A sudden loud music is heard.
t
The build-in sound demonstration is
activated. Press VOL – to reduce the
volume or press
x
to stop the
demonstration.
Sound