Sony BDV-E6100 Operating Instructions 1 - Page 57
BRAVIA Internet Video, BRAVIA Sync, Control for HDMI], Network connection, Wireless LAN, connection
View all Sony BDV-E6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Additional Information t If the USB device is connected via a USB hub, disconnect it and connect the USB device directly to the unit. • The connected equipment's setting for the [Control for HDMI] function is correct. BRAVIA Internet Video The picture/sound is poor/certain programs display with a loss of detail, especially during fast-motion or dark scenes. t Picture/sound quality may be poor depending on Internet content providers. t Picture/sound quality may be improved by changing the connection speed. Sony recommends a connection speed of at least 2.5 Mbps for standarddefinition video and 10 Mbps for highdefinition video. t Not all videos contain sound. The picture is small. t Press V to zoom in. "BRAVIA" Sync ([Control for HDMI]) The [Control for HDMI] function does not work ("BRAVIA" Sync). t Check that [Control for HDMI] is set to [On] (page 48). t If you change the HDMI connection, turn the system off and on again. t If power failure occurs, set [Control for HDMI] to [Off], then set [Control for HDMI] to [On] (page 48). t Check the following and refer to the operating instructions supplied with the equipment. • The connected equipment is compatible with the [Control for HDMI] function. Network connection The system cannot connect to the network. t Check the network connection (page 19) and the network settings (page 49). Wireless LAN connection You cannot connect your PC to the Internet after [Wi-Fi Protected Setup (WPS)] is performed. t The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. The system cannot connect to the network or the network connection is unstable. t Check if the wireless LAN router is on. t Check the network connection (page 19) and the network settings (page 49). t Depending on the usage environment, including the wall material, radio wave reception conditions, or obstacles between the system and the wireless LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other. 57US