Sony BKM-21D Installation Manual - Page 41
Assigning input signals to connectors, General, Input/Output Connectors, Signal Characteristics
View all Sony BKM-21D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Assigning input signals to connectors Before inputting signals to the BKM-27T, you must specify the type and format of the signal that will be input to each connector. To assign input signals to each connector, use the on-screen INPUT CONFIGURATION menu of your video monitor. For information about using the INPUT CONFIGURATION menu, refer to the manual of your video monitor. Specifications General Power requirements +5 V, ±6 V, +15 V (supplied from the monitor) Power consumption 4 W Recommended operating temperature 20°C to 30°C (68°F to 86°F) Permissible operating temperature 0°C to 40°C (32°F to 104°F) Operating humidity 0% to 90% (no condensation) Maximum external dimensions 25 × 256 × 245 mm (31/32 × 101/8 × 93/4 inches) Mass 580g (1 lb 11 oz) Input/Output Connectors BNC × 6, high impedance, with loop-through output Signal Characteristics Analog composite, YC signals Signal level Analog composite 1 Vp-p +3 dB/-6 dB YC Y: 1 Vp-p ±6 dB C: 0.286 Vp-p ±6 dB (NTSC burst signal level) 0.3 Vp-p ±6 dB (PAL burst signal level) Luminance signal Frequency characteristics Analog composite Filter off: 100 MHz to 6 MHz ± 2 dB (monochrome signal) Filter on: -30 dB relative to subcarrier frequency YC Y: 100 Hz to 6 MHz ±2 dB Chrominance signals Demodulation axis R-Y/B-Y Subcarrier synchronization range ±200 Hz min. Chroma phase adjustment range ±10° min. DG (differential gain) APL 10% to 90% 5% max. DP (differential phase) APL 10% to 90% 5° max. Chrominance signal/luminance signal Delay time error 100 nsec max. Gain error 5% max. Aperture compensation Off: 0 dB On: 2 to 6 dB (5 MHz) Return loss -46 dB min. (6 MHz) Analog component (Y/R-Y/B-Y, RGB) signals Signal level Y/R-Y/B-Y Y: 1 Vp-p ±6 dB R-Y: 0.7 Vp-p ±6 dB B-Y: 0.7 Vp-p ±6 dB R/G/B 1 Vp-p ±6 dB (sync on G) Frequency characteristics Y 100 Hz to 6 MHz ±2dB R-Y/B-Y 100 Hz to 6 MHz ±1dB R/G/B 100 Hz to 6 MHz ±1dB Chrominance signals/luminance signal Delay time error 50 nsec Gain error 5% max. Aperture compensation (Y/R-Y/B-Y) Off: 0 dB On: 2 to 6 dB (5 MHz) Return loss -46 dB min. (6MHz) Accessories Supplied Installation Manual (1) Design and specifications are subject to change without notice. 17(E)