Sony BKM-21D Installation Manual - Page 43
Analog composite signals, Analog component Y/R-Y/B-Y, RGB signals
View all Sony BKM-21D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Assigning Input Signals to Connectors Before inputting signals to the BKM-28X, you must specify the type and format of the signal that will be input to each connector. To assign input signals to each connector, use the on-screen INPUT CONFIGURATION menu of your video monitor. For information about using the INPUT CONFIGURATION menu, refer to the manual of your video monitor. Specifications General Power requirements +5 V, ±6 V (supplied from the monitor) Power consumption 1 W Recommended operating temperature 20°C to 30°C (68°F to 86ºF) Permissible operating temperature 0°C to 40°C (32°F to 104°F) Operating humidity 0% to 90% (no condensation) Maximum external dimensions (w/h/d) 25 × 256 × 245 mm (31/32 × 101/8 × 93/4 inches) Mass 550g (1 lb 3 oz) Analog component (Y/R-Y/B-Y, RGB) signals Signal level Y/R-Y/B-Y Y: 1 Vp-p ±6 dB R-Y: 0.7 Vp-p ±6 dB B-Y: 0.7 Vp-p ±6 dB R/G/B 1 Vp-p ±6 dB (sync on G) Frequency characteristics Y 100 Hz to 6 MHz ±2dB R-Y/B-Y 100 Hz to 6 MHz ±2dB R/G/B 100 Hz to 6 MHz ±1dB Chrominance signal/luminance signal Delay time error 50 nsec max. Gain error 5% max. Aperture compensation (Y/R-Y/B-Y) Off: 0 dB On: 2 to 6 dB (5 MHz) Return loss -46 dB min. (6 MHz) Accessories Supplied Installation Manual (1) Design and specifications are subject to change without notice. Input/Output Connectors BNC × 6, high impedance, with loop-through output Signal Characteristics Analog composite signals Signal level Analog composite 1 Vp-p +3 dB/-6 dB YC Y: 1 Vp-p ±6 dB C: 0.286 Vp-p ±6 dB (NTSC burst signal level) 0.3 Vp-p ±6 dB (PAL burst signal level) Return loss -46 dB min. (6 MHz) 19(E)