Sony CCD-FX311 Primary User Manual - Page 6
Sony CCD-FX311 Manual
View all Sony CCD-FX311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installing the Lithium Battery To keep birth dales in the camcorders memory and to activate the clock, the lithium battery must be installed 1 Remove the lithium battery holder located at the bottom of the camcorder. 2 Install the supplied CR2025 Itthium battery with the e side facing down. ids :de 3 Put the lithium battery holder into the camcorder. Lithium battery life The battery wig last for approximately 1 year in normal operation. When the lithium battery becomes weak. the et indicator will blink in the viewfinder screen for about 5 seconds when you sat the POWER switch to CAMERA. In this case, replace the battery with a Sony CR2025 or Duracell DL-202S Use of any other battery may present a risk of tire or explosion. When replacing the lithium battery, keep the battery pack or What power sconce dildaead. Otherwise, resetting the date, time arid birth date. WM be necessary. Changing the lithium battery Remove the lithium battery holder from the camcorder, and pull out the lithium battery and insert a new one. WARNING Cautions Battery mar explode dl mistreated. Done, recharge. &assemble. or depose a in tire. • Keep the lithium battery out el Me mach of children Should Me battery be swallowed. immediately consult a dealer. • Do nil hold the battery with metallic Mecum. otherwise a atext-circull may DC.. 10 Getting staved 4- Setting the Date and Time You need to set your camcorder's date and time to be able to superimpose the dale and time onto your video. Make sure that the power source and lithium battery are attached. 3,4,5,6 2 00 1 Press the small green button on the POWER switch and slide the POWER switch to CAMERA. 2 Set the STANDBY switch up. 3 Press DATE (a) end TIME (NEXT) simultaneously for a few seconds until the date Indicator appears in the viewfinder. The DATE button now functkms as. (to advance numbers) and the TIME button functions as NEXT Ito sat). 4 Adlust the blinking digits of 0 the year, month, day, and hour by using DATE (a), and by pressing TIME (NEXT). VIh!' .r^wIIs!:IIIIII 2= o SIM. ....' ___ V i`" '- ' . . '" ' - ':J j Notes • When you keep DATE (4) pressed. the digits advance faster. • The year starts at 1992 and proceeds as follows: 1992-, 999-.2000---.2020 i I 410 . ,'(-..... 5 Adios( the blinking digits of minute by pressing DATE (s). 6 Press TIME (NEXT) to set the second to "00". The clock starts operating. ,.....,, 17, Correcting the date and time settings Repeat steps 3 to 6. Get arted 1 1