Sony CDX-GT81UW Operating Instructions - Page 17
Removing the unit, Fuse replacement, Cleaning the connectors - installation
View all Sony CDX-GT81UW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
• Be sure to observe the correct polarity when installing the battery. • Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. Removing the unit 1 Remove the protection collar. 1 Detach the front panel (page 5). 2 Pinch both edges of the protection collar, then pull it out. Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Fuse (10A) Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 5) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged. x 2 Remove the unit. 1 Insert both release keys simultaneously until they click. Hook facing inwards. Back of the front panel Notes • For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. • Never touch the connectors directly with your fingers or with any metal device. 2 Pull the release keys to unseat the unit. 3 Slide the unit out of the mounting. 17