Sony CDX-GT81UW Operating Instructions - Page 9

Receiving a station through a list - LIST, USB devices, Playback of USB devices, Display items

Page 9 highlights

Receiving a station through a list - LIST You can list up the frequency. 1 Select the band, then press (LIST). The frequency appears. 2 Rotate the volume control dial until the desired station appears. USB devices Playback of USB devices 3 Press (ENTER) to receive the station. The display returns to normal reception mode. With the card remote commander Select the band, then press (LIST). Press M or m repeatedly until the desired station appears, then press (ENTER). 1 Connect the USB device to the USB terminal. Playback starts. If a USB device is already connected, press (SOURCE) repeatedly until "USB" appears, to start playback. Press (OFF) to stop playback. Notes • Before removing a USB device, be sure to stop playback first. If you remove your USB device during playback, data in the USB device may be damaged. • Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection. Display items A ATRAC/WMA/MP3/AAC indication*1 WMA/MP3/AAC indication*2 B Clock C Track/album/group number, Disc/artist/ album/group/track name, Elapsed playing time, Text information *1 When an ATRAC Audio Device is connected. *2 When a Mass Storage Class Device is connected. To change display items C, press (DSPL); scroll display items C, press (SCRL) or set "Auto Scroll on" (page 12). continue to next page t 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

9
Receiving a station through a list
— LIST
You can list up the frequency.
1
Select the band, then press
(LIST)
.
The frequency appears.
2
Rotate the volume control dial until the
desired station appears.
3
Press
(ENTER)
to receive the station.
The display returns to normal reception
mode.
With the card remote commander
Select the band, then press
(LIST)
. Press
M
or
m
repeatedly until the desired station appears, then
press
(ENTER)
.
USB devices
Playback of USB devices
1
Connect the USB device to the USB
terminal.
Playback starts.
If a USB device is already connected, press
(SOURCE)
repeatedly until “USB” appears, to
start playback.
Press
(OFF)
to stop playback.
Notes
Before removing a USB device, be sure to stop
playback first. If you remove your USB device during
playback, data in the USB device may be damaged.
Do not use USB devices so large or heavy that they
may fall down due to vibration, or cause a loose
connection.
Display items
A
ATRAC/WMA/MP3/AAC indication*
1
WMA/MP3/AAC indication*
2
B
Clock
C
Track/album/group number, Disc/artist/
album/group/track name, Elapsed playing
time, Text information
*1
When an ATRAC Audio Device is connected.
*2
When a Mass Storage Class Device is connected.
To change display items
C
, press
(DSPL)
;
scroll display items
C
, press
(SCRL)
or set
“Auto Scroll on” (page 12).
continue to next page
t