Sony CMT-HPX7 Operating Instructions - Page 13

CD/MP3 - Play Creating your own program - Program Play You can make a program of up to 25 steps from all the discs in the order you want to play them. You can synchro record the programed tracks onto a cassette tape (page 18). Use buttons on the remote for the operation. 1 Press CD (or FUNCTION repeatedly) until "CD" appears. 2 Press PLAY MODE in stop mode repeatedly until "PGM" appears. 3 Press DISC SKIP repeatedly (or press one of the disc buttons (DISC 1 - 5 and DISC +1) on the unit) to select a disc. To program all the tracks on a disc at once, proceed to step 5 with "AL" displayed. 4 Press ./> repeatedly until the desired track number appears. When programing an MP3, press ALBUM +/- to select an album, then press ./ > repeatedly until the desired track number appears. Selected track number 6 Program additional discs or tracks. To program Repeat steps Other discs 3 and 5 Other tracks on the 4 and 5 same disc Other tracks on other discs 3 to 5 7 Press N (or CD/NX on the unit). Program Play starts. Other operations To Cancel Program Play Clear a track from the end Do this Press PLAY MODE in stop mode repeatedly until "PGM" disappears. Press CLEAR in stop mode. Tips • The program you made remains after Program Play finishes. To play the same program again, press CD (or FUNCTION on the unit repeatedly) until "CD" appears, then press N (or CD/NX on the unit). However, the program is cleared when you press Z on the unit. appears when the total CD program time exceeds 100 minutes, or when you select a disc with 20 tracks or more, or when you select an MP3 audio track. Current disc Total playing time 5 Press ENTER (or PLAY MODE on the unit). The track is programed. The program step number appears, followed by the total playing time. 13GB