Sony CMT-HPX7 Operating Instructions - Page 20

Waking up to music, — Play Timer

Page 20 highlights

Waking up to music - Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 9). Use buttons on the remote for the operation. 1 Prepare the sound source you want to play. • CD: Load a disc. To start from a specific track, make a program (see "Creating your own program" on page 13). • TAPE: Load a tape (see "Playing a tape" on page 17). • TUNER: Tune in a radio station (see "Listening to the radio" on page 15). 2 Adjust the volume. 3 Press CLOCK/TIMER SET. 4 Press ./> repeatedly until "PLAY SET" appears, then press ENTER. "ON" appears and the hour indication flashes. 5 Set the time to start playing. Press ./> repeatedly to set the hour, then press ENTER. The minute indication flashes. Press ./> repeatedly to set the minute, then press ENTER. 6 Set the time to stop playing following the same procedure as step 5. 7 Press ./> repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD PLAY T t TAPE PLAY T 8 Press ENTER. The start time, the stop time, and the sound source appear in turn, then the original display returns. 9 Press ?/1 to turn off the system. Other operations To Check the setting Change the setting Cancel the timer Do this 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until "PLAY SEL" appears, then press ENTER. Start over from step 1. 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until "TIMER OFF" appears, then press ENTER. Notes • If you use Play Timer and Sleep Timer at the same time, Sleep Timer has priority. • Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, Play Timer will not be activated. • You cannot use the optional component connected to the MD/VIDEO jacks or the transmitter (CMTHPX10W only) as sound sources for Play Timer. • You cannot activate Play Timer and Rec Timer simultaneously. 20GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

20
GB
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 9).
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 13).
TAPE: Load a tape (see “Playing a tape”
on page 17).
TUNER: Tune in a radio station (see
“Listening to the radio” on page 15).
2
Adjust the volume.
3
Press CLOCK/TIMER SET.
4
Press
./>
repeatedly until “PLAY
SET” appears, then press ENTER.
“ON” appears and the hour indication
flashes.
5
Set the time to start playing.
Press
./>
repeatedly to set the hour,
then press ENTER.
The minute indication flashes.
Press
./>
repeatedly to set the
minute, then press ENTER.
6
Set the time to stop playing following
the same procedure as step 5.
7
Press
./>
repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8
Press ENTER.
The start time, the stop time, and the sound
source appear in turn, then the original
display returns.
9
Press
?/1
to turn off the system.
Other operations
Notes
If you use Play Timer and Sleep Timer at the same
time, Sleep Timer has priority.
Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
If the system is on about 15 seconds before the preset
time, Play Timer will not be activated.
You cannot use the optional component connected to
the MD/VIDEO jacks or the transmitter (CMT-
HPX10W only) as sound sources for Play Timer.
You cannot activate Play Timer and Rec Timer
simultaneously.
Waking up to music
— Play Timer
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
T
To
Do this
Check the setting
1
Press CLOCK/TIMER
SELECT.
2
Press
./>
repeatedly
until “PLAY SEL” appears,
then press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
2
Press
./>
repeatedly
until “TIMER OFF” appears,
then press ENTER.