Sony CMT-L1 Operating Instructions - Page 17
Labelling the preset stations — Station Name, Using the Radio Data System (RDS)
View all Sony CMT-L1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Tuner Labelling the preset stations - Station Name You can label each preset station with up to 10 symbols or characters (Station Name). 1 Tune in the station you want to label (see page 16). 2 Follow the same procedures as from steps 2 to 6 on "Labelling a CD" (see page 13). To cancel labelling Press MENU/NO on the remote. To erase the station name 1 Tune in the station. 2 Press NAME EDIT/SELECT on the remote. 3 Press CLEAR on the remote repeatedly to erase the name. 4 Press ENTER/YES on the remote. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display. To check the RDS information Each time you press DISPLAY, the display changes cyclically as follows: Station name** t Frequency t Clock display t Preset Equalizer name t Volume ** If the RDS broadcast is not properly received, the station name may not appear in the display. Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS)* is a broadcasting service that allows radio stations to send additional information along with the regular program signal. Note RDS may not work properly if the station you have tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they all provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. 17GB