Sony CPD-1303 Operating Instructions (primary manual) - Page 32

Adjustments A number of digital controls are provided to allow you to optimize the display parameters to your preferences. In addition to the following adjustment directions, a Monitor Adjustment Reference Card has been provided for your convenience. Please place it in an easily accessible location near your monitor. Normal Operation Mode Brightness Adjustment C 1 • 0 Using the -) adjustment buttons, Press "+" for more brightness. Press "-" for less brightness. Picture Contrast Adjustment + 1• O Using the O adjustment buttons, Press "+" for more contrast. Press "-" for less contrast. ■ When the limit value is reached, the POWER SAVING indicator will begin to flash. ■ Press the RESET button to recall the factory settings for brightness and picture contrast. See "Caution" below. ■ Note: The brightness and contrast settings are common for all video timings. Adjustment Mode To leave Normal Operation Mode and enter Adjustment Mode, press and hold the SELECT button until the "CENT" LED indicator illuminates. You can then press the SELECT button to choose any of the five adjustments and use the "+" and "-" buttons as described on the following pages to fine tune your monitor. The Centering, Size and Pincushion Geometry adjustments are unique to each mode while the Raster Rotation, Convergence, and Color Temperature adjustments are common to all modes. ■ When the limit value is reached, the POWER SAVING indicator will begin to flash. IL Adjustments will be stored automatically and the monitor will return to the Normal Operation Mode after 8 seconds of non-use. CAUTION: In adjustment mode, pressing the RESET button recalls the factory settings for Size, Centering and Pincushion Geometry_for the current mode, and Raster Rotation, Convergence and Color Temperature, which is common to all modes. Pressing the CTRL and RESET buttons together clears all user-defined data in memory.