Sony CPD-1303 Operating Instructions (primary manual) - Page 36
Entering, Timings, Power, Saving, Function, Swivel
View all Sony CPD-1303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Entering New Timings When using a video mode that does not match one of the 9 factory preset modes, some fine tuning may be required to optimize the display to your preferences. Simply adjust the monitor according to the preceding adjustment instructions. The adjustments will be stored automatically and recalled whenever that mode is used. A total of 11 user-defined modes can be stored in memory. If a 12th mode is entered, it will replace the first. Power Saving Function This monitor is capable of 2 states of reduced power consumption. State 1 Normal operation Suspend 2 (1st step of power saving) 3 Active-off (2nd step of power saving) Power consumption 100% approx. 10% approx. 7% By sensing the absence of one or both sync signals coming from the host computer, it will reduce power consumption as follows. Required resumption time approx. 3 sec. 0 Power indicator green on green on POWER SAVING indicator off orange on approx. 10 sec. off orange on Power Saving Operation The H-sync or V-sync is not present. The unit goes into suspend state. Both the H-sync and V-sync are not present. 4 The unit goes into active-off state. The monitor requires a videocard or screen saver software which switches off one or both sync signals to activate the power saving function. CAUTION: The Power Saving function will automatically put the monitor into the Active-off state if the power switch is turned on without any video signal input. Once the horizontal and vertical syncs are sensed, the monitor will automatically return to its Normal operation state. Use of the Tilt-Swivel With the tilt-swivel, this•unit can be adjusted to be viewed at your desired angle within 90° horizontally and 20° vertically. To turn the unit vertically and horizontally, hold it at its bottom with both hands and push in the desired direction. The tilt-swivel can not be removed. 45° 15° 45° 17