Sony D-NE320 Operating Instructions - Page 26
Additional Information, Troubleshooting
View all Sony D-NE320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Additional Information Troubleshooting Should any problem persist after you have checked these symptoms, consult your nearest Sony dealer. Sound Symptom The volume does not increase even if you press VOL + repeatedly. No sound, or noise is heard. A rustling noise is heard from the CD. SOUND items cannot be set up. Cause and/or corrective action "AVLS" is set to "ON." Set it to "OFF" ( page 24). Connect the headphones/earphones plugs firmly. The plugs are dirty. Clean the headphones/earphones plugs with a dry soft cloth periodically. Close the lid of the battery compartment firmly ( page 9). "POWER SAVE" is set to "ON." Set it to "OFF" ( page 25). Operation/Playback Symptom The playing time is too short. The CD does not play. Certain tracks cannot be played. "Low Battery" appears on the display, and the CD does not play. "Hi DC in" appears on the display. The CD does not play, or "No Disc" appears on the display when a CD is placed in the player. 26 Cause and/or corrective action Check that you are using an alkaline battery and not a manganese battery. Replace the dry battery with a new LR6 (size AA) alkaline battery ( page 9). You tried to play files saved in a format that is not compatible with this player ( page 5). Change the setting of "CD-EXTRA" in the OPTION menu. You may play your CD ( page 25). Replace the dry battery with a new LR6 (size AA) alkaline battery ( page 9). An AC power adaptor which is rated higher than the one supplied is being used. Use only the supplied AC power adaptor or the car battery cord recommended in "Optional Accessories" ( page 29). The CD is dirty or defective. Clean it or change it. Check that the CD is inserted with the label side up ( page 12). Moisture condensation has occurred. Leave the CD player aside for several hours until the moisture evaporates. Close the lid of the battery compartment firmly ( page 9). Make sure the battery is inserted correctly ( page 9). Connect the AC power adaptor to an AC outlet securely ( page 11). Press /ENTER after one second or more has passed since the AC power adaptor was connected. The CD-R/CD-RW in the player is blank. There is a problem with the quality of the CD-R/CD-RW, recording device, or application software.