Sony DCR-HC1000 Camera Operations Guide - Page 13
Step 2: Charging the battery pack - power cord
View all Sony DCR-HC1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting started Step 2: Charging the battery pack You can charge the battery by attaching the "InfoLITHIUM" battery pack (F series) to your camcorder. b Note • Only the "InfoLITHIUM" battery pack (NP-FF70/ FF71) can be used (p. 123). • Do not short-circuit the DC plug of the AC Adaptor or battery terminals with any metallic objects. This may cause a malfunction. • Use a nearby wall outlet when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet immediately if any malfunction occurs. 2 Insert the battery pack in the direction of the arrow until it clicks. 3 Close the battery compartment lid. 4 With the v mark on the DC plug facing the battery compartment lid side, connect the AC Adaptor to the DC IN jack on your camcorder. DC IN jack DC plug v mark Power cord To the wall outlet AC Adaptor 1 Push the catch on the battery compartment lid in the direction of the arrow 1 to open the lid. 5 Connect the power cord to the AC Adaptor. 6 Connect the power cord to the wall outlet. ,continued Getting started 13