Sony DCR-SX63 Operating Guide - Page 61

such as by placing anything heavy on it.  Do not use a deformed or damaged battery pack.  Keep metal contacts clean.  If the battery electrolytic liquid has leaked:  Consult your local authorized Sony service facility.  Wash off any liquid that may have contacted your skin.  If any liquid gets in your eyes, wash with plenty of water and consult a doctor. When not using your camcorder for a long time  To keep your camcorder in optimum state for a long time, turn it on and let it run by recording and playing back images about once a month.  Use up the battery pack completely before storing it. LCD screen  Do not exert excessive pressure on the LCD screen, as it may cause damage.  If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction.  While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction. To clean the LCD screen  If fingerprints or dust make the LCD screen dirty, it is recommended that you use a soft cloth to clean it. When you use the LCD Cleaning Kit (sold separately), do not apply the cleaning liquid directly to the LCD screen. Use cleaning paper moistened with the liquid. On handling the casing  If the casing is soiled, clean the camcorder body with a soft cloth lightly moistened with water, and then wipe the casing with a dry soft cloth.  Avoid the following to avoid damage to the finish:  Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent, insecticide and sunscreen  Handling the camcorder with above substances on your hands  Leaving the casing in contact with rubber or vinyl objects for a long period of time About care and storage of the lens  Wipe the surface of the lens clean with a soft cloth in the following instances:  When there are fingerprints on the lens surface  In hot or humid locations  When the lens is exposed to salty air such as at the seaside  Store in a well-ventilated location subject to little dirt or dust.  To prevent mold, periodically clean the lens as described above. On charging the pre-installed rechargeable battery Your camcorder has a pre-installed rechargeable battery to retain the date, time, and other settings even when the camcorder is turned off. The preinstalled rechargeable battery is always charged while your camcorder is connected to the wall outlet (wall socket) via the AC Adaptor or while the battery pack is attached. The rechargeable battery will be fully discharged in about 3 months if you do not use your camcorder at all. Use your camcorder after charging the pre-installed rechargeable battery. However, even if the preinstalled rechargeable battery is not charged, the camcorder operation will not be affected as long as you are not recording the date. Procedures Connect your camcorder to a wall outlet (wall socket) using the supplied AC Adaptor, and leave it with the LCD screen closed for more than 24 hours. US 61 Additional information