Sony DCR-TRV15 Operating Instructions - Page 72
Confirming VCR operation
View all Sony DCR-TRV15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Dubbing only desired scenes - Digital program editing (4) Confirming VCR operation 1 Insert a recordable tape into the VCR, then set to recording pause. 2 Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial. 3 Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial. If the VCR starts recording, the setting is correct. When finished, the indicator changes to COMPLETE. 2 OTHERS ED I TSET CONTROL ADJ TEST " CUT- I N " " CUT-OUT " ENGAGE I R SETUP REC PAUSE P AUS EMODE I R TEST RETURN RETURN EXECUTE [ MENU ] : END 3 OTHERS ED I TSET CONTROL ADJ TEST " CUT- I N " " CUT-OUT " I R SETUP P AUS EMODE I R T E S T COMP L E T E RETURN [ MENU ] : END When the VCR does not operate correctly • After checking the code in "About the IR SETUP code," set the IR SETUP or the PAUSEMODE again. • Place your camcorder at least 30 cm (12 in.) away from the VCR. • Refer to the operating instructions of your VCR. 72