Sony DHG-M55CV Installation Guide - Page 22
TV with RF Connector Only, Connect the Digital Network Receiver
View all Sony DHG-M55CV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connecting the Digital Network Receiver TV with RF Connector Only 1 Connect the coaxial cable from the wall outlet (Cablevision cable network signal) to the Digital Network Receiver's CABLE IN jack. 2 Connect the Digital Network Receiver's TO TV/VCR jack to the TV's VHF/UHF IN (or RF IN) jack. 3 Connect one end of the AC power cord to the Digital Network Receiver's AC IN jack, then connect the plug end to an AC outlet. 4 Tune to channel 3 on your TV to see cable channels. 1 2 From wall outlet Coaxial cable 3 AC cord TV 16
Connecting the Digital Network Receiver
16
TV with RF Connector Only
1
Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Network Receiver
’
s
CABLE IN
jack.
2
Connect the Digital Network Receiver
’
s
TO TV/VCR
jack to the TV
’
s
VHF/UHF IN (
or
RF IN
) jack.
3
Connect one end of the AC power cord to the Digital Network
Receiver
’
s
AC IN
jack, then connect the plug end to an AC outlet.
4
Tune to channel 3 on your TV to see cable channels.
TV
AC cord
Coaxial cable
From wall
outlet
1
3
2