Sony DHG-M55CV Installation Guide - Page 25
TV and VCR with A/V Connectors
View all Sony DHG-M55CV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connecting the Digital Network Receiver TV and VCR with A/V Connectors See the illustration on the next page for details. 1 Connect the coaxial cable from the wall outlet (Cablevision cable network signal) to the Digital Network Receiver's CABLE IN jack. 2 Connect the Digital Network Receiver's LINE OUT 1 (TV) AUDIO /VIDEO jacks to the TV's AUDIO/VIDEO IN jacks. 3 Connect the Digital Network Receiver's LINE OUT 2 (VCR) AUDIO /VIDEO jacks to the VCR's AUDIO/VIDEO IN jacks. 4 Connect the VCR's AUDIO/VIDEO OUT jacks to the TV's AUDIO/VIDEO IN jacks. ✍ If your TV has only one A/V input, the RF connection from VCR to TV is required for watching through the VCR. 5 Connect one end of the AC power cord to the Digital Network Receiver's AC IN jack, then connect the plug end to an AC outlet. ✍ If your components have S VIDEO jacks: For best picture quality, use an S VIDEO connection instead of the yellow video cable on your combined A/V cable. Using an S VIDEO cable, connect the Digital Network Receiver's S VIDEO OUT jack to the TV's S VIDEO IN jack. S VIDEO does not provide audio, so audio cables must still be connected to provide sound. 19