Sony DMXWL1 Reference Guide - Page 17
Other Information, Attaching the Transmitter Unit Stand
UPC - 027242744592
View all Sony DMXWL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Other Information Other Information Attaching the Transmitter Unit Stand The transmitter unit can also be used vertically with the supplied stand. 1 Match the Guide Pin on the center of the stand and the screw hole on the right side of the transmitter unit. Guide Pin Attaching the Receiver Unit Attaching the Receiver Unit to the Rear of the TV 1 Attach the supplied TV Mounting bracket to the bottom left side of the TV rear panel. Plastic Fastener Transmitter unit 2 Secure the screw. Stand Screw Guide Pin Insert the two Plastic Fasteners (supplied) into the holes to hold the TV Mounting bracket in place. Push the head of the Plastic Fastener with your finger until it clicks. ~ • Do not push the head of the Plastic Fastener until you have inserted the fastener into the hole on the TV. 2 Align the slider on the bottom of the receiver unit with the groove of the TV Mounting bracket. ~ • To remove the bracket from the TV, use a Phillips screw driver (not supplied) to loosen the Plastic Fasteners. (continued) 17