Sony DRC-BT30 Operating Instructions - Page 10
Pairing, What is pairing?, Procedures of pairing
UPC - 027242777880
View all Sony DRC-BT30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Pairing What is pairing? Bluetooth devices need to be "paired" with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases: Pairing information is deleted after repair, etc. When you attempt to pair with 9 or more devices. This unit can be paired with up to 8 devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one. When recognition of the unit by the device to be connected is deleted. This unit is initialized (page 25). All pairing information is deleted. Procedures of pairing 1 Place the Bluetooth device within 1 m (3 ft) of this unit. 2 Open the cover of the USB () jack. Press and hold the PAIRING button for 2 seconds or more to standby for pairing while the unit is turned off. The indicator (blue) and indicator (red) flash in turn and the unit enters into pairing mode. Note If pairing is not established within about 5 minutes, pairing mode will be canceled and this unit will turn off. In this case, start over from step 1. 10 US