Sony DRC-BT30 Operating Instructions - Page 8
Charging the unit - accessories
UPC - 027242777880
View all Sony DRC-BT30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Charging the unit The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time. 1 Open the cover of the USB () jack. 2 Connect the supplied USB cable to the unit, and then connect the other end to a computer. When connecting, insert the connector with facing down. Notes If this unit is not used for a long time, the indicator (red) may not light up when you connect the USB cable to charge this unit. In this case, do not disconnect the USB cable from the unit and wait until the indicator (red) lights up. When you close the cover of the USB () jack after charging, push the cover thoroughly until the tab is full inserted. For system requirements for a personal computer that can charge the battery using USB, see "System requirements for battery charge using USB" (page 27). Charging starts when the unit and the computer are connected. Make sure that the indicator (red) lights up. Charging is completed in about 2.5 hours* and the indicator (red) goes off automatically. * Time required for empty battery to recharge. Tips If the USB cable is connected to a computer while the unit is turned on, the unit will be turned off automatically. To charge the unit from an AC outlet, use the USB charging AC power adaptor ACU50AD (sold separately*) or ACU501AD(sold separately*). For details, refer to the manuals supplied with the USB charging AC power adaptor. This unit cannot be turned on while charging. * The above optional accessories are not provided in some areas. US