Sony DRC-BT30 Operating Instructions - Page 11

If Passcode, input is required - instructions

Get Sony DRC-BT30 PDF manuals and user guides
UPC - 027242777880
View all Sony DRC-BT30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

3 Perform pairing procedure on the Bluetooth device to detect this unit. The list of detected devices appears on the display of the Bluetooth device. This unit is displayed as "DRC-BT30." If "DRC-BT30" is not displayed, repeat from step 1. Notes  For details, refer to the operating instructions supplied with the Bluetooth device.  When pairing with a Bluetooth device that cannot display a list of detected devices or that has no display, you may pair the device by setting both this unit and the Bluetooth device to pairing mode. At this time, if passcode is set besides "0000" on the Bluetooth device, pairing cannot be done with this unit. 4 Select "DRC-BT30" on the display of the Bluetooth device. 5 If Passcode* input is required on the display of a Bluetooth device, input "0000." Pairing is complete when the indicator (blue) flashes slowly. The message standing for "Pairing complete" appears on the display of some Bluetooth devices. * Passcode may be called "Passkey," "PIN code," "PIN number," or "Password." Note Passcode may not be required depending on the connected Bluetooth device. For details, refer to the operating instructions supplied with the Bluetooth device. 6 Start the Bluetooth connection from the Bluetooth device. This unit memorizes the device as the last connected device. Some Bluetooth devices may connect with the unit automatically when pairing is complete. Tips  To pair with other Bluetooth devices, repeat steps 1 to 5 for each device.  To delete all pairing information, see "Initializing the unit" (page 25). 11 US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
11
US
²
Perform pairing procedure on
the
Bluetooth
device to detect
this unit.
The list of detected devices appears
on the display of the
Bluetooth
device. This unit is displayed as
“DRC-BT30.” If “DRC-BT30” is
not displayed, repeat from step 1.
Notes
For details, refer to the operating
instructions supplied with the
Bluetooth
device.
When pairing with a
Bluetooth
device
that cannot display a list of detected
devices or that has no display, you
may pair the device by setting both
this unit and the
Bluetooth
device to
pairing mode. At this time, if passcode
is set besides “0000” on the
Bluetooth
device, pairing cannot be done with
this unit.
4
Select “DRC-BT²0” on the
display of the
Bluetooth
device.
5
If Passcode
*
input is required
on the display of a
Bluetooth
device, input “0000.”
Pairing is complete when the
indicator (blue) flashes slowly. The
message standing for “Pairing
complete” appears on the display
of some
Bluetooth
devices.
* Passcode may be called “Passkey,” “PIN
code,” “PIN number,” or “Password.”
Note
Passcode may not be required
depending on the connected
Bluetooth
device. For details, refer to the operating
instructions supplied with the
Bluetooth
device.
6
Start the
Bluetooth
connection
from the
Bluetooth
device.
This unit memorizes the device as
the last connected device. Some
Bluetooth
devices may connect
with the unit automatically when
pairing is complete.
Tips
To pair with other
Bluetooth
devices,
repeat steps 1 to 5 for each device.
To delete all pairing information, see
“Initializing the unit” (page 25).