Sony DSC-T500/B Cyber-shot® Handbook - Page 113
Shooting still images/movies, Recording takes a long time.
UPC - 027242732032
View all Sony DSC-T500/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Troubleshooting Shooting still images/movies Cannot record images. • Check the free capacity of the internal memory or "Memory Stick Duo". If it is full, do one of the following: - Delete unnecessary images (page 35). - Change the "Memory Stick Duo." • You cannot record images while charging the flash. • Set the mode switch. • The image size is set to [1280×720(Fine)] or [1280×720(Standard)] and "Memory Stick Duo" is inserted when recording movies. Do one of the following: - Set the image size to [VGA]. - Insert a "Memory Stick PRO Duo." The start point/end point of a recorded movie differs from the point at which the shutter button was pressed. • When using this camera, a slight time difference may arise between the time the shutter button is pressed and when recording actually starts/stops. This is not a malfunction. The subject is not visible on the screen. • The camera is set to the playback mode. Press mode (page 31). (Playback) button to switch to the shooting Anti-blur function does not work. • The anti-blur function does not work when appears on the display. • The anti-blur function may not work properly when shooting night scenes. • Shoot after pressing the shutter button halfway down; do not press it fully down suddenly. Recording takes a long time. • The NR slow shutter function is activated (page 18). This is not a malfunction. The image is out of focus. • The subject is too close. Shoot in (Macro On) mode. Make sure to position the lens farther away from the subject than the shortest shooting distance (approximately 8 cm (3 1/4 inches) (W) or 80 cm (31 1/2 inches) (T) from the lens). Or set to (Close focus enabled) mode and shoot about 1 to 20 cm (13/32 to 7 7/8 inches) from the W side distance (pages 28, 30). • (Twilight) mode or (Landscape) mode or (Fireworks) mode is selected in the Scene Selection when shooting still images. • The Focus preset function is selected. Select the auto focus mode (page 45). • Refer to "If the subject is out of focus" on page 46. Troubleshooting 113