Sony DSC-T500/B Cyber-shot® Handbook - Page 51
EV: Adjusting the light intensity, Focus: Changing the focus method
UPC - 027242732032
View all Sony DSC-T500/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Using the shooting functions Shooting menu For details on the operation 1 page 38 On the Burst • When recording with the self timer, a series of a maximum of five images is recorded. • The recording interval is approximately 0.74 seconds. The recording interval becomes longer, depending on the setting for the image size. • When the battery level is low, or when the internal memory or "Memory Stick Duo" is full, the Burst stops. • You may not be able to shoot images in the Burst mode depending on the Scene Selection mode (page 43). • The focus, white balance, and exposure are adjusted for the first image, and these settings are also used for the other images. On the Exposure Bracket • The focus and white balance are adjusted for the first image, and these settings are also used for the other images. • When you adjust the exposure manually (page 49), the exposure is shifted based on the adjusted brightness. • The recording interval is the same as that for Burst mode, but becomes slower depending on the shooting conditions. • If the subject is too bright or too dark, you may not be able to shoot properly with the selected bracket step value. • You may not be able to shoot images in the Exposure Bracket mode depending on the Scene Selection mode (page 43). EV: Adjusting the light intensity Manually adjusts the exposure. This menu is the same as the menu that appears when you touch the EV setting button in (Program Auto) mode. See page 49. Focus: Changing the focus method You can change the focus method. Use the menu when it is difficult to get the proper focus in Auto Focus mode. This menu is the same as the menu that appears when you touch the Focus setting button in (Program Auto) mode. See page 44. Metering Mode: Selecting the metering mode Selects the metering mode that sets which part of the subject to measure to determine the exposure. This menu is the same as the menu that appears when you touch the Metering Mode setting button in (Program Auto) mode. See page 47. 51