Sony DSX-GS80 Help Guide - Page 65
SUBW DIRECT subwoofer direct connection, SUBWOOFER subwoofer, HPF high pass filter
View all Sony DSX-GS80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Item Detail LPF FREQ (low pass filter frequency) Selects the subwoofer cut-off frequency: [50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. LPF SLOPE (low pass filter slope) Selects the LPF slope: [1], [2], [3]. SUBW DIRECT (subwoofer direct connection) Adjusts the settings for the subwoofer connected to the rear speaker lead without a power amplifier. (Available only when [RBE MODE] is set to [OFF].) When connecting a 2Ω or 4 Ω to 8 Ω subwoofer to either of the rear speaker leads, set [SPEAKER LOAD] to [2 OHM]. When using a subwoofer with dual voice coil, or using subwoofer(s) by connecting to the right and left rear speaker leads, set [SPEAKER LOAD] to [2 OHM]. Item SUBW MODE (subwoofer mode) SUBW PHASE (subwoofer phase) SUBW POS (subwoofer position) LPF FREQ (low pass filter frequency) LPF SLOPE (low pass filter slope) Detail Selects the subwoofer mode: [1], [2], [3], [OFF]. Selects the subwoofer phase: [NORMAL], [REVERSE]. Selects the subwoofer position: [NEAR], [NORMAL], [FAR]. (Available only when [F/R POSITION] is set to other than [OFF].) Selects the subwoofer cut-off frequency: [50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. Selects the LPF slope: [1], [2], [3]. SUBWOOFER (subwoofer) Item Detail SUBW LEVEL (subwoofer level) Adjusts the subwoofer volume level: [+10 dB] - [0 dB] - [-10 dB]. ([MUTE] is displayed at the lowest setting.) SUBW PHASE (subwoofer phase) Selects the subwoofer phase: [NORMAL], [REVERSE]. SUBW POS (subwoofer position) Selects the subwoofer position: [NEAR], [NORMAL], [FAR]. (Available only when [F/R POSITION] is not set to [OFF].) LPF FREQ (low pass filter frequency) Selects the subwoofer cut-off frequency: [50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. LPF SLOPE (low pass filter slope) Selects the LPF slope: [1], [2], [3]. HPF (high pass filter) 65