Sony DSX-GS80 Help Guide - Page 69

Help Guide In-Car Receiver DSX-GS80 BLUETOOTH Setup (BLUETOOTH) PAIRING (pairing) Connects up to two BLUETOOTH devices: [DEVICE 1], [DEVICE 2]. [DEVICE 1] or [DEVICE 2] will be changed to the paired device name after pairing is complete. SELECT AUDIO (select audio device) Selects the audio device. [*] appears on the device paired with [DEVICE 1] or the current A2DP compatible audio device. RINGTONE (ringtone) Select the source of the ringtone output from the speakers: [1] (ringtone preset in this unit), [2] (ringtone from the mobile phone*). * Depending on the mobile phone, this setting may not be available. AUTO ANSWER (auto answer) Sets this unit to answer an incoming call automatically: [OFF], [3 SECONDS] (about 3 seconds), [10 SECONDS] (about 10 seconds). AUTO PAIRING (auto pairing) Start BLUETOOTH pairing automatically when iOS device version 5.0 or later is connected via USB: [ON], [OFF]. BT SIGNAL (BLUETOOTH signal) Activates/deactivates the BLUETOOTH function. BT INIT (BLUETOOTH initialize) Initializes all the BLUETOOTH related settings (pairing information, device information, etc.): [YES], [NO]. When disposing the unit, initialize all the settings. (Available only while the source is off and the clock is displayed.) VOICE OUT (voice output) Selects the speakers for handsfree calling: [VOICE FRONT] (front speakers), [VOICE REAR] (rear speakers), [VOICE ALL] (all speakers). (Available only while the source is off and the clock is displayed.) 5-006-642-11(2) Copyright 2019 Sony Corporation 69