Sony DSX-M50BT Operating Instructions - Page 29
Radio reception, USB playback, BLUETOOTH function, You cannot play back items viaUSB hub.
View all Sony DSX-M50BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
During playback or reception, the demonstration mode starts. If no operation is performed for 5 minutes with [DEMO-ON] set, the demonstration mode starts. Set [DEMO-OFF] (page 21). The display disappears from/does not appear in the display window. The dimmer is set to [DIM-ON] (page 21). The display disappears if you press and hold OFF. Press OFF on the unit until the display appears. The connectors are dirty (page 25). Radio reception Stations cannot be received. The sound is hampered by noises. The connection is not correct. If your boat has built-in radio antenna (aerial) in the rear/side glass, connect an REM OUT lead (blue/white striped) or accessory power supply lead (red) to the power supply lead of a boat's antenna (aerial) booster. Check the connection of the boat antenna (aerial). If the auto antenna (aerial) will not extend, check the connection of the power antenna (aerial) control lead. The tuning step setting has been erased. Set the tuning step again (page 10). Preset tuning is not possible. The broadcast signal is too weak. RDS PTY displays The current station is not an RDS station. RDS data has not been received. The station does not specify the program type. USB playback You cannot play back items via a USB hub. This unit cannot recognize USB devices via a USB hub. A USB device takes longer to play back. The USB device contains files with a complicated tree structure. The sound is intermittent. The sound may be intermittent at a high-bit- rate of more than 320 kbps. BLUETOOTH function The connecting device cannot detect this unit. Before the pairing is made, set this unit to pairing standby mode. While connected to a BLUETOOTH device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from another device. When the device pairing is made, set the BLUETOOTH signal output to on (page 11). Connection is not possible. The connection is controlled from one side (this unit or BLUETOOTH device), but not both. Connect to this unit from a BLUETOOTH device or vice versa. 29GB