Sony DVP-CX850D Operating Instructions - Page 7
Getting Started, Unpacking - remote control
View all Sony DVP-CX850D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Getting Started This section describes how to hook up the CD/DVD player to a TV (with audio/video input jacks) and/or an AV receiver (amplifier). You cannot connect this player to a TV which does not have a video input connector. Be sure to turn off the power of each component before making the connections. Unpacking Check that you have the following items: • Audio/video/S-link connecting cord (1) • S video cord (1) • Remote commander (remote) RMT-D113A (1) • Size AA (R6) batteries (2) Inserting batteries into the remote You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the + and - on the batteries. When using the remote, point it at the remote sensor g on the player. z You can control TVs and AV receivers using the supplied remote See page 67. Notes • Do not leave the remote in an extremely hot or humid place. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you will not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Transporting the player Before transporting the player, follow the procedure below to return the internal mechanisms to their original positions. 1 Remove all the discs form the disc slots. 2 Close the front panel. Make sure that "NO DISC" appears in the front panel display. 3 Wait for 10 seconds, then perss 1/ u to turn of the player. 7