Sony FWD-42PV1A Protocol Manual - Page 6

Code Table(1-a) continued [a]Function [b]Range/Switch Code 0x10 0x13 0x14 0x16 0x17 0x18 0x1B 0x40 0x41 0x42 0x60 0x65 0x66 0x67 0x68 Index Number Power Saving Speaker Out HD Mode RGB Mode Sync Mode Clock Display All White BackGroud Auto Dimmer Digital Port IP Setting Mode IP Setting Execute IP Setting Result Speed Setting 0x01-0xFF 0x00 Standard 0x01 Reduce 0x00 ON 0x01 OFF 0x00 1080i 0x01 1035i 0x00 DTV 0x01 PC 0x00 H/Comp 0x01 Video 0x00 OFF 0x01 ON 0x00 OFF 0x01 ON 0x00 Gray 0x01 Dark Gray 0x02 Black 0x00 OFF 0x01 ON 0x00 Port 1 0x01 Port 2 0x00 DHCP 0x01 Manual 0X02 Speed 0x00 No 0x01 Yes 0x00 Done 0x01 Error 1 (UART Commu.) 0x02 Error 2 (Duplication) 0x03 Error 3 (IP Add Setting) 0x04 Error 4 (GW Add setting) 0x05 Error 5 (DNS1 Setting) 0x06 Error 6 (DNS2 Setting) 0x07 Error 7 (Sbnt Msk Setting) 0x00 100Mbps/Full Duplex 0x01 100Mbps/Half Duplex 0x02 10Mbps/Full Duplex 0x03 10Mbps/Half Duplex 0x04 Auto Control Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Command Enquiry Standby Yes Disable Yes Disable Yes Disable Yes Disable Yes Disable Yes Disable Yes Disable Yes Disable Power On Enable Enable Enable Enable Enable Enable Enable Enable Yes Disable Enable Yes Disable Enable Yes Enable Enable Yes Enable Enable Yes Enable Enable Yes No Enable Enable Yes Yes Enable Enable *1: After sending the Power On/Off command, wait for 10 sec. before sending a new command. Otherwise the display may no receive the command correctly. *2: Because of the option slots' spec difference between 42LX1 and 42PV1 and their relation with the BKM-FW32, Option2 command of LX1 is assigned as Option1 command of 42PV1