Sony FWD-50PX2 User Manual - Page 10

Location and Function of Parts and Controls 7 OPTION1 (VIDEO/COM) slot This slot supports video signals and the communication function. The slot accepts optional adaptors for video signal input/output (such as BKMFW10, BKM-FW11, BKM-FW12) as well as optional adaptors with network management capability (such as BKM-FW32, BKM-FW50). These adaptors allow you to control the display unit via the network. 8 OPTION2 (VIDEO) slot This slot supports video signals. A blank panel is attached to this slot when shipped from the factory. The slot accepts optional adaptors for video signal input/output. For optional adaptors with network management capability, use the OPTION1 slot 7. Optional adaptors (Not supplied) The connectors marked with 7 and 8 on the connector panel are slot-in type and can be fitted with any of the optional adaptors described below. For details on installation, consult your Sony dealers. Video/S-Video Input/Output Adaptor BKMFW10 Same as pre-installed 6. COMPONENT/RGB Input Adaptor BKM-FW11 Y/G 1 COMPONENT/RGB INPUT ADAPTOR PR/CR/R PB/CB/B HD VD 2 3 AUDIO 1 Y/G PB/CB/B PR/CR/R IN (BNC) : Connects to the analog RGB signal or component (YUV) signal output of a piece of video equipment or a computer. 2 HD VD IN (BNC) : Connects to the synchronization signal output of a computer. 3 AUDIO (Stereo minijack) : Inputs an audio signal. Connects to the audio output of a piece of video equipment or a computer. 10 (GB)