Sony FWD-50PX2 User Manual - Page 13

Caution Provide an ample amount of space around the display • To prevent internal heat buildup from sealing off the display, make sure to ensure proper ventilation by leaving open the minimum amount of space around the display, as illustrated below. • The ambient temperature must be 0 °C to +35 °C (32 °F to 95 °F). • When installing the display horizontally, use the display stand SU-50FW (not supplied) as a stand. • Regarding the installation of hardware such as brackets, screws, or bolts, we cannot specify the products. Actual installation is up to the authorized local dealers. Consult with qualified Sony personnel for installation. • While the unit is on, a certain amount of heat builds up inside. This can cause burns. Avoid touching the top or rear of the unit when it is powered on or just after it has entered standby mode. When using the stand (not supplied) Front 20 (7 7/8) 10 10 (4) (4) Side 10 (4) Caution When mounting the display horizontally Front 25 (9 7/8) 10 10 (4) (4) Side 25 (9 7/8) 5 (2) Units: cm (inches) When mounting the display vertically Front 20 (7 7/8) 25 (9 7/8) Side 10 (4) 25 (9 7/8) Make sure that the 1 POWER switch is at the lower position. 5 (2) Units: cm (inches) Note When moving or installing the display when it is attached to the stand (not supplied), do so with at least 3 people. Units: cm (inches) Note When mounting the display vertically, you cannot use the speakers SS-SP50FW (not supplied). 13 (GB)