Sony HCD-MDX10 Service Manual - Page 23
Selecting The Test Mode
View all Sony HCD-MDX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
5-5. SELECTING THE TEST MODE There are 31 types of test modes as shown below. The groups can be switched by rotating the AMS dial. After selecting the group to be used, press the MD WALKMAN SYNC button. After setting a certain group, rotating the AMS dial switches between these modes. Refer to "Group" in the table for details selected. All items used for servicing can be treated using group S. So be carefully not to enter other groups by mistake. Display TEMP CHECK LDPWR CHECK EF MO CHECK EF CD CHECK FBIAS CHECK S curve CHECK VERIFY MODE DETRK CHECK TEMP ADJUST LDPWR ADJUST EF MO ADJUST EF CD ADJUST FBIAS ADJUST EEP MODE MANUAL CMD SVDATA READ ERR DP MODE SLED MOVE ACCESS MODE 0920 CHECK HEAD ADJUST CPLAY2 MODE CREC2 MODE ADJ CLEAR AG Set (MO) AG Set (CD) Iop Read Iop Write INFORMATION CPLAY MODE CREC MODE Contents Temperature compensation offset check Laser power check Traverse (MO) check Traverse (CD) check Focus bias check S letter check Non-volatile memory check Detrack check Temperature compensation offset adjustment Laser power adjustment Traverse (MO) adjustment Traverse (CD) adjustment Focus bias adjustment Non-volatile memory control Command transmission Status display Error history display, clear Sled check Access check Outermost circumference check Head position check Same functions as CPLAY MODE Same functions as CREC MODE Initialization of non-volatile memory of adjustment value Auto gain output level adjustment (MO) Auto gain output level adjustment (CD) IOP data display IOP data write Microprocessing version display Continuous play mode Continuous recording mode Mark (X) (X) (X) (X) (!) (X) (X) (X) (X) (X) (X) (X) (X) Group (*) C S C S C S C S C S C C C AS AS AS AS AS D D D S D D D D D D AS AS AS C S AS C S CASD CASD Group (*) C: Check S: Service A: Adjust D: Develop • For details of each adjustment mode, refer to "5. Electrical Adjustments". For details of "ERR DP MODE", refer to "Self-Diagnosis Function" on page 3. • If a different mode has been selected by mistake, press the MENU/NO button to exit that mode. • Modes with (X) in the Mark column are not used for servicing and therefore are not described in detail. If these modes are set accidentally, press the MENU/NO button to exit the mode immediately. Be especially careful not to set the modes with (!) as they will overwrite the non-volatile memory and reset it, and as a result, the unit will not operate normally. - 23 -