Sony HDR CX7 Operating Guide - Page 9

Step 2: Charging the battery pack Getting Started DC IN jack POWER switch DC plug /CHG lamp Battery pack AC Adaptor Power cord To the wall outlet You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your camcorder. b Notes • Your camcorder operates only with an "InfoLITHIUM" battery pack (H series). 1 Connect the AC Adaptor to the DC IN jack on the Handycam Station. Be sure that the v mark on the DC plug is facing up. 2 Connect the power cord to the AC Adaptor and the wall outlet. 4 Attach the battery pack by sliding it in the direction of the arrow until it clicks. 5 Place the camcorder on the Handycam Station as shown above, and insert it into the Handycam Station securely, all the way to the bottom. The /CHG (charge) lamp lights up and charging starts. The /CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station. 3 Slide the POWER switch in the direction of the arrow to OFF (CHG) (the default setting). 9