Sony HDR UX10 Operating Guide - Page 141
Quick Reference, The Active Interface Shoe has a safety - camcorder accessories
UPC - 027242727748
View all Sony HDR UX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
A Built-in microphone (40) An Active Interface Shoe compatible microphone (optional) will take precedence when connected. B Lens (Carl Zeiss Lens) C Flash (88) D Infrared port/Remote sensor Point the Remote Commander (p. 142) towards the remote sensor to operate your camcorder. E Camera recording lamp (96) Lights up in red during recording. Flashes when remaining media space or battery power is low. F HDMI OUT jack (50) G Active Interface Shoe The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. Refer to the operating instructions supplied with your accessory for details. The Active Interface Shoe has a safety device for fixing the installed accessory securely. To connect an accessory, press down and push it to the end, and then tighten the screw. To remove an accessory, loosen the screw, and then press down and pull out the accessory. • When you are recording movies with an external flash (optional) connected to the accessory shoe, turn off the power of the external flash to prevent charging noise being recorded. • You cannot use an external flash (optional) and the built-in flash at the same time. • When an external microphone (optional) is connected, it takes precedence over the internal microphone (p. 40). • Slide the shoe cover after pulling out the viewfinder. H Viewfinder lens adjustment lever (27) I (VIEW IMAGES) button (34, 44) J EASY button (34) K . (back light) button (42) L Tripod receptacle Attach the tripod (optional: the length of the screw must be less than 5.5 mm (7/32 in.)) to the tripod receptacle using a tripod screw. Continued , 141 Quick Reference