Sony HDR UX10 Operating Guide - Page 89
FLASH LEVEL, REDEYE REDUC, FACE DETECTION, INDEX SET, Customizing your camcorder, NORMAL
UPC - 027242727748
View all Sony HDR UX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Customizing your camcorder OFF ( ) Records without flash. b Notes • The recommended distance to the subject when using the built-in flash is approximately 0.3 to 2.5 m (1 to 8 feet). • Remove any dust from the surface of the flash lamp before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp. • /CHG lamp (p. 139) flickers while charging the flash, and remains lit when charging is complete. • If you use the flash when shooting a backlit subject or in bright places, the flash may not be effective. FLASH LEVEL You can set this function when you shoot still images using the built-in flash, or an external flash (optional) that is compatible with your camcorder. HIGH( ) Makes the flash level higher. B NORMAL( ) LOW( ) Makes the flash level lower. REDEYE REDUC You can set this function when you shoot still images using the built-in flash, or an external flash (optional) that is compatible with your camcorder. Set [REDEYE REDUC] to [ON], then set [FLASH MODE] (p. 88) to [AUTO] or [ON] to display . You can prevent redeye by activating the flash before recording. b Notes • The redeye reduction may not produce the desired effect due to individual differences and other conditions. FACE DETECTION Adjusts the focus/color/exposure of face images automatically. Also, adjusts face images for clear viewing. B ON ( ) Detects face images in frames, then adjusts their image quality automatically. Face detection frame Face detection icon ON [NO FRAMES] ( ) Detects face images without frames, then adjusts their image quality automatically. OFF Face images are no detected. b Notes • Your camcorder may not be able to detect face images depending on the recording condition. • Your camcorder may not be able to optimize the images depending on the recording condition. In this case, set [FACE DETECTION] to [OFF]. INDEX SET The camcorder detects faces automatically during movie recording. The default setting is [ON]. Face icons and their meanings : This icon appears when the setting is [ON]. : This icon flashes when your camcorder detects a face. The icon stops flashing when the face is recorded in the Face Index. : This icon appears when faces cannot be recorded in the Face Index. Continued , 89